Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Folsom, CA
Gate installation in Folsom means working with a city of two halves. The historic district brings 19th-century brick piers and hand-forged iron that were never built for modern opener weight, while Empire Ranch and Folsom Ranch bring builder-grade aluminum posts set into expansive clay that heaves with every wet-dry cycle. As a gate specialist, we carry solutions for both. From a sagging wood gate on Sutter Street to a new automatic driveway system in Folsom Ranch, we diagnose the gate you have, not the gate we’d prefer to sell. Call (877) 752-3866 for a free estimate.
Why Folsom Homes Are Different
Folsom’s soil is the quiet variable behind most gate failures here. Decomposed granite and clay expand when the first heavy rains arrive, then shrink through the hot, dry summer. The result is leaning posts, binding hinges, and gates that drag across the driveway. Re-plumbing a post and re-aligning hardware is often the actual repair, not a parts swap. In the historic district, driveway gates frequently hang on stone or brick piers where hinge plates were bolted directly into mortar joints. Mortar crumbles under the levered weight of a steel gate, and the fix requires masonry work as much as gate hardware. Folsom’s 1980s and 1990s tract homes have their own pattern: aluminum gates on undersized post footings, with the post base slowly working loose from the concrete. Newer homes in Folsom Ranch tend to have better posts but lighter gates, which means wind rattle and latch misalignment become the common complaints. This mix of housing stock is why one truck has to carry old-world iron hardware and modern aluminum components on the same day.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Folsom Services
Two services dominate the calls we take from Folsom: mechanical gate repair for gates that have fallen out of alignment or stopped swinging properly, and electric gate repair for openers that have failed at the motor, board, or sensor level. Both are covered below, and each has its own dedicated Folsom page.
Gate Repair in Folsom
Mechanical gate repair in Folsom usually starts with the post, not the gate itself. Clay soils shift, posts lean, and the gate binds against the latch or drags on the driveway. We re-plumb posts, re-align hinges, and replace worn wheels on slide gates. Older homes in the historic district often need hinge plates re-anchored into stone or brick piers. For the full scope of this work, see Gate Repair in Folsom.
Electric Gate Repair in Folsom
Electric gate repair in Folsom covers the motor, control board, safety sensors, and access hardware. Folsom’s heat stresses capacitors and circuit boards over time, and wiring runs through the same shifting ground that leans posts. A gate that opens but won’t close is often a sensor fault, not a motor failure. We diagnose the system as a whole. Details are on Electric Gate Repair in Folsom.
Gate Installation in Folsom
A new gate in Folsom has to handle clay soil, dry heat, and the visual character of the neighborhood it lives in. Whether it’s a hand-built wood gate for a historic district home or an aluminum automatic system for a Folsom Ranch driveway, the post footing must go deep enough to resist seasonal movement, and the hardware has to be sized for the actual weight of the gate. We handle the full job, from footing to hinges to operator. The service hub for this work is Gate Installation.
Automatic Gate Installation
Signs you need it
A gate you open by hand multiple times a day, or a gate you leave open because closing it is a hassle, is a candidate for automation.
What it costs in Folsom
Automatic gate installation in Folsom typically runs $1,500 to $2,600 for a single swing gate with an opener, with prices rising for double gates or commercial-duty operators.
How we do it
We set the gate and posts, mount the operator, and wire the system with safety edges and a proper ground, then adjust travel limits and force settings until it runs smoothly.
Driveway Gate Installation
Signs you need it
If your current driveway gate leans into the drive, drags at the latch point, or no longer closes square against the post, replacement is usually more cost-effective than repeated alignment calls.
What it costs in Folsom
A new driveway gate in Folsom typically runs $1,000 to $2,500 installed, depending on material, width, and whether automation is included.
How we do it
We remove the old gate and hardware, check the existing posts for plumb and footing depth, then install the new gate with hinges rated for its weight and adjust the latch to close cleanly.
Sliding Gate Installation
Signs you need it
A driveway that slopes steeply or frontage without swing clearance is best served by a slide gate; a gate that repeatedly derails is showing you the limit of its track design.
What it costs in Folsom
Sliding gate installation in Folsom typically runs $2,500 to $6,000 or more, since the job includes the track, rollers, motor, and usually a welded steel frame.
How we do it
We run the track on a level concrete or steel base, set the posts for the guide rollers, hang the gate, and connect the motor with proper limit stops and reversing hardware.
What Gate Installation Costs in Folsom
| Item | Typical range in Folsom |
|---|---|
| New driveway gate, installed | $1,000 – $2,500 |
| Automatic gate with opener | $1,500 – $2,600 |
| Sliding gate, motorized | $2,500 – $6,000 |
Folsom’s clay soil means we sometimes need a deeper footing or a larger concrete pad for a slide track. The written estimate sets the final price, and you approve that number before any work begins.
Do I need a permit to install a gate in Folsom?
Rules vary by property and whether the gate is automated, so we recommend checking with the City of Folsom building department. Many residential gate replacements do not require one, but an automated system often triggers review. Call (877) 752-3866 and we’ll walk through what applies to your street.
Can you match a gate to a historic Folsom home?
Yes, we install wood and hand-forged style iron gates that fit the character of the district, with hinge plates anchored into stone or brick the right way rather than into mortar joints. Call (877) 752-3866 for an exact quote on your property.
Brands We Service in Folsom
We service Linear, Viking, Ghost Controls, and DoorKing operators, among others. Our technicians carry common control boards, remote receivers, and sensor parts for these systems, which shortens repair turnaround in Folsom. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Folsom, CA
| Service | Typical range in Folsom |
|---|---|
| Gate repair, minor mechanical | $150 – $300 |
| Gate repair, significant structural | $300 – $1,000 |
| Gate repair, severe structural | $1,000 – $2,500 |
| Electric gate repair, component-level | $200 – $500 |
| Electric gate repair, control board or motor | $500 – $1,500 |
| Electric gate repair, full system overhaul | $1,500 – $3,500 |
| New driveway gate, installed | $1,000 – $2,500 |
| Automatic gate with opener | $1,500 – $2,600 |
| Sliding gate, motorized | $2,500 – $6,000 |
Folsom’s two biggest price drivers are post condition and automation age. A gate on original 1980s posts with clay-induced lean usually costs more to put right than one on a stable footing. Every job is priced by written estimate before work starts, never after.
Neighborhoods We Serve in Folsom
We work across Folsom, from the historic streets near Sutter Street to the newest homes in Folsom Ranch. Most calls put a technician in the area the same day you call.
- Empire Ranch
- Folsom Ranch
- Historic Folsom
- Natoma Station
- Briggs Ranch
Service Area – Cities Near Folsom
Our Folsom routes also cover the surrounding communities. We regularly run repairs in Orangevale, CA, El Dorado Hills, CA, Fair Oaks, CA, and Rocklin, CA, with the same gate-specialist approach we bring to every job.
Serving Folsom, CA – Our Local Coverage Area
We serve Folsom and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Folsom
We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. Same-day service is available for most repair calls in Folsom. Call (877) 752-3866 and we’ll tell you the next opening.
Some communities in Folsom, particularly master-planned areas like Empire Ranch, do have design standards for front-facing gates. We recommend checking your HOA’s CC&Rs before scheduling an installation. We can work with the approved material and style once you know the requirement.
Yes. We come out, look at your gate and its posts, take measurements, and write a fixed price. You approve the estimate before we start any work. Call (877) 752-3866 to set up a time, Sunday through Friday from 7am to 7pm.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Folsom Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Michelle Barrett"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Michelle Nguyen"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
- Oscar Castillo